Professional Diagnostic Tool,W164 Can Filter

W164 Can Filter

Filter the km synchronization command between the cluster and the EZS module.

This is the only way for the correction of w164 new models.

W164 Can Filter (for 2006 model of ML-164, SLK-171, E-211, R-230)

H4 HID Hi/lo Kit

H4 HID hi/lo kit, HID Conversion Kit:
The HID kit is for car headlight to replace conventional halogen kit and it can turn up/down for hi/lo light.

Hi/Lo xenon bulb
Power available: 35W/55W or Others you need.
Voltage available: 12V/24V.
Color temperature: 3000K-30000K.
Special color temperature: Golden /pink /blue/ purple.
Working temperature: -40 -- +105 degree.

All the bulbs gone through strict photoelectricity filtrating/pairing
And aging test to guarantee perfect quality and long service life of bulbs.
Full range, cover all type for different car models/voltage/power and color temperature.

Package:
Inner box size: 350x240x65mm
Carton box size: 485x350x345mm
QTY/CTN: 10sets
VAS 5054A, PSA LEXIA3, Renault Can Clip, Autocom CDP Prog, Gm Tech-2 Pro Kit, Ford vcm IDS

CN900 Auto Key Programmer

Function 1:

1) Read out the chip code for 11 12 13 33 T5 40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.

2) New identify functions for Toyota "G" chip key (year: 2010) (Chip: 4D-72).

And it will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.

Function 2:

It can identify Toyota smart key, and read out the data.

Function 3:

It supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.

Using "FREE" dedicated chips can copy none battery 4C and 4D chips directly. (Remark: cn1(4C), cn2(4D) is the name of special chip)

Later<SPAN style="FONT-SIZE: 10pt" 10pt? FONT-SIZE:>it will add the function for copying ID 46 chip.

Function 4:

Connecting with Chinese PC software, it can save the read key code data unlimited.

Function 5:

Support on the chip programming: with the inner function of HITAGETI, it can write ID 46 Renault Crypto chips.

Function 6:

Without removing the ECU (Benz W140), it can start the chip.

Function 7:

It can unlock the 48 chips except the crypto lock 48 chips.

Function 8:

Support on the pin code calculating for Hyundai and Kia (before 07 year), by using the Last 6 Codes of VIN Number.

Function 9:

Support on starting the key and calculating the pin code for more than 60 kinds of cars.

Support on programming all kind of Fiat key, such as (11, 13 and 33), These 3 kinds of 48 chips anti-theft way.

Function 10:

It Upgrade to identify HONDA_46 CRV_46/CIVIC_46/ Mitsubishi 46

Ordinary 60 can be programmed to be 66/67/68/71/74

Function 11:

It Upgrade to copy CN1 (4C), CN2 (4D) chip, and size is 6mmX12mmX4mm

Support on the software update, such as adding new function for copying the induction card for Electronic Gate.

VAS 5054A, PSA LEXIA3, Renault Can Clip, Autocom CDP Prog, Gm Tech-2 Pro Kit, Ford vcm IDS

PWG PROG-Powergate - Personal OBD Programmer

Powergate - Personal OBD programmer

Powergate is the most versatile device ever created for serial programming via diagnostic plug. By using all the newer protocols of communication (K-LINE, CAN and J1850), Powergate can read and write the Electronic Control Unit of many vehicles on the market.
Powergate has an internal memory which can contain, in addition to the original file, two different maps. In this way, the owner of the vehicle has always at his disposal two different developing steps of the map, to be uploaded on the ECU at any moment.

Updating protocols of communication has never been so easy: a connection to the internet and a few minutes are all it is required to access Alientech Data Bank for downloading everything is needed to make Powergate operative on the largest number of vehicles as possible. This solution was studied for different operating situations, as it is suitable both to professional tuners who want to propose a product always up-to-date, than to users who make use of Powergate solely on their own cars. A very versatile device with first-class features.
The display of items on its large screen is very simple. The device itself will guide you through the reading and writing of the ECU, with clear and detailed instructions. Another interesting innovation of Powergate is the option to quickly and easily check and erase DTC Errors.
PWGpro is the software to manage Powergate, a simple interface that guides user from choosing the vehicle, to saving and uploading several mapping files, ready to be written directly on the vehicle.

Versions
To better meet our customers' needs, Powergate is proposed in the following versions, each addressed to a different target:
Powergate M - available from version M01 to M12, is addressed to professional tuner only for programming vehicles of a certain brand..
Customizations
Alientech gives his dealers the opportunity to customize Powergate with their company logo or a personal brand. You can customize your faceplate, using any pattern and color. You can even customize the software interface and the logo that is shown on the display when you turn on the device, thus your customized Powergate becomes the winning solution for promoting your own brand.
VAS 5054A, PSA LEXIA3, Renault Can Clip, Autocom CDP Prog, Gm Tech-2 Pro Kit, Ford vcm IDS

Coating Thickness Gauge 068F

Description:This instrument adopts the magnetism and backset measuring thickness methods. It can measure the thickness of the covering layer of non-magnetism (such as aluminum, chrome, copper, enamel, rubber and oil paint) which are covered on the magnetism metal substrates (such as steel, iron, alloy and rigid magnetism steel) and the thickness of covering layer of non-transmitting electricity (such as enamel, rubber, oil paint and plastic) which are covered on the non-magnetism metal substrates (such as copper, aluminum, zinc and tin). It has many characteristics, such as little error of measuring, excellent performance, good stability and easy operation. It is such a necessary measure instrument to control and guarantee the product quality that it is widely applied to manufacturing, metal processing industry, chemical industry and merchandise testing field

Specifications

Test method:the magnetism and backset measuring

Measure range:0~1250um

Measure precision:±(3%H±1.5)

Display precision:0~99.9um：0.1um/ Over 100um：1um

Minimum substrate:10*10 mm

Minimum curvature:protruding5mm,concave25mm

Most thinnest substrate:0.5mm

Environment temperature:0℃~40℃

Relative humidity:≤85%

Power:DC9V×1

Dimension:125mm×74mm×33mm

VAS 5054A, PSA LEXIA3, Renault Can Clip, Autocom CDP Prog, Gm Tech-2 Pro Kit, Ford vcm IDS

TMS374 ECU DECODER

This Tool is a frequency sweeper with 5V square wave output (Duty cycle 50%, effective frequency range from over 10kHz (max 50kHz) to 50Hz) .This tool can be also considered as a MCU version of the software TMS-374 Decoder ECU. The only difference between the two tools is that the MCU version works without a PC.
A small MCU is used to generate the pulses instead of the PC RS232 Tx line. The TMS 374 software is in fact a simple frequency sweeper with an effective range from about 2000Hz to about 100Hz. The Tiny sweeper does exactly the same but much more better (bigger range).
After powering the device on - the LED should blink twice. Pressing the button will start the sweep procedure. LED ON - means there are pulses on the output. After reaching the lowest frequency the LED goes off and the mcu stops the generation.
Connection diagram:
+ :12v DC
- : GND
S :signal wire

• Power the sweeper and ECU
• Connect the GND line to any suitable GND on the ECU
• Connect the Data line to the Reset pin on the 27C512 or 28F512

TMS-374 Decoder ECU info
The sweeper should work with the following ECUs:

VAS 5054A, PSA LEXIA3, Renault Can Clip, Autocom CDP Prog, Gm Tech-2 Pro Kit, Ford vcm IDS

Professional Diagnostic Tool,AutoCom CDP Pro

• Categories:
• Professional Diagnostic Tool

• Type:
• Code Reader

Autocom CDP Pro Car 
Autocom Cdp pro truck 
both released!
if you need order the car or truck full cables,pls contact with your sellers to get more detail informatioin and price.
Autocom CDP Pro (Compact Diagnostic Partner )
Autocom CDP Pro is a PC based OBD II diagnostic tool with full functionality for reading and erasing diagnostic fault codes (DTC),
real-time data, activations of components, adjustments and so on. CDP Pro supports 16 pole (J1962) diagnostic socket
and handles all known communications standards for vehicle diagnostics
Autocom diagnostic tools are intuitive, fast and user friendly!
The CDP Pro database offers a deep OBD2 generic and manufacturer specific coverage of
European Cars like MB, BMW, Audi, VW, Porsche, Volvo, SAAB, Jaguar, Land Rover etc,
and very good coverage of Japanese and North American Cars. For diagnostics in older pre-OBD2 cars,
Autocom supplies specific OBD1 cables.
The CDP Pro database is translated to several languages and is frequently updated.
Autocom uses Original Data from vehicle manufacturers to guarantee the best quality and functionality.
Wireless communication is included in all of Autocom's diagnostic products.
The user can also add extra options such as repair information,
service schedules and electrical diagrams from external suppliers,
which can be connected to the program with ready to use links.
Autocom CDP Pro features
User-friendly and intuitive software for passenger cars, light and heavy commercial vehicles and buses
Fast and safe identification of vehicles and systems with the aid of Autocom ISI (Intelligent System Identification)
Intelligent System Scan (ISS) function - automatically scans through all the vehicle's control systems
Bluetooth and USB connectivity are standard
Software available on CD/DVD and the Internet for PCs, or SD-card for handheld PCs
Quick and easy installation
Handles all current communications standards for vehicle diagnostics
Help texts for available functions
Reading and erasing fault codes
Reading real-time data
Restoring service messages
Programming capabilities such as injectors, keys, remote controls etc
Unique multiplex technology, which minimises the need for special cables
AUTOCOM CDP Pro (Compact Diagnostic Partner )
CDP Pro (Compact Diagnostic Partner Pro) is the user-friendly wireless multi-brand diagnostic tool.
Together whit a Pocket PC (handheld) or PC it makes a powerful professional tool for the independent workshop.
You can perform serial diagnose, read and erase fault code, basic settings,
programming and perform service reset. Regular updates are available for subscribers.
Functions
-Manufacture specific serial diagnose
-Scan function
-EOBD/OBDII communication
-Serial Systems
-Engine
-Ignition
-Climate
-ABS
-Service reset
-SRS
-Immobilizer
-Instrument
-Comfort system
-Gear-box etc.
In serial we do following:
-Read and erase fault codes
-Read live data
-Basic settings
-Programming
-Scan function
-Fully compliant to the eOBD/OBDII standard
Packing
Hardware
Software DVD
USB cable
User manuel
Languages:English,Polish,Russia,Spanish,France,Turkish,Italian,Germany,etc.

• Best selling items
• Launch Diagnostic tool
• Launch x431
• Odometer Correction/Auto chip tunning
• Bmw professional diagnostic tool
• VAG Diagnostic Tools

OBD SUPPLY Electrics Co.,Ltd Engaged in making auto electrical diagnostic tools.Such as Launch x431 GX3 ,Launch x431 diagum,BMWOPS,BMWGT1,MBstarC3 ,Lexia3,Minvcm,BMWPA140,Vag5054a,VAGCOM106,VAGK+CANCOMMANDER3.6 ,SUPERMBSTAR2010,digimaster III ,Autoboss v30 scanner, C168 Original scanner,Renault clip v97 and so on.With the accumulated expertise and versatile service unit,Totally development of product,upon customers' requirement
VAS 5054A, PSA LEXIA3, Renault Can Clip, Autocom CDP Prog, Gm Tech-2 Pro Kit, Ford vcm IDS

Do you have a guarantee or warranty for all products

Yes - Link4gamechooses products to sell based on their excellent designs and proven hardware reliability. Autocom CDP Prog So the quality is guaranteed.

We check all of your orders during the packing stage to make sure that the right accessories are included and that the adapters and other standards are correct for your country.

We have a QA team who tests your ordered products are functioning correctly before they are packed and sent to you. Renault Can Clip This is in addition to the normal quality assurance checks that all the goods have passed in the factory line.

All our products are covered by a 12 MONTH WARRANTY, for return and repair / replacement.

In essence this means that faulty products can be returned to Link4game, Ford vcm IDS we will make the repairs or instant replacement and ship them back to you.